Category Archives: software

Extract ALL pictures from Powerpoint in seconds

Here is a very simple tip to extract and save ALL images from powerpoint in 5 seconds

Extract ALL pictures from Powerpoint in 5 seconds

Extract ALL pictures from Powerpoint in seconds


The picture should explain everything.

If you need help, here’s the gist.

  1. First make sure that file-extensions are visible (so that you can see the .pptx or .docx)
  2. Click and rename the .pptx or .docx to .zip
  3. Right click and extract to a new folder
  4. Open the folder and go to pptx/media
  5. Enjoy



If your file extensions are not visible, the easiest way to make it seen is to

  1. go to My Computer
  2. Press Alt (This makes File / Edit / Tools , etc visible on top)
  3. Tools > Folder Options > Show Extensions for known file types.

TXT’N'WALK helps you to text , walk and not fall

A new mobile phone application has launched that promises to let you see where you are going while you are looking at your phone.

Called TXT’N'WALK the application, which is available on the iPhone, Blackberry, S60 and Android operating systems will use the camera found on the back of your phone to show you the pavement in front of you while you access your email or the web on your phone.

“We found that lots of people look at their phones while they are walking”, said a spokesman for the company Looflirpa who makes the app. “This way you can do so without the fear of walking into someone – or a lamppost”.

The app, which will be available by the end of the week from the relevant platform’s download stores will cost £2.99 in the UK and $4.99 in the US.

The need for the TXT’N'WALK app is clearly answering an as-yet untapped demand. In a recent poll on Pocket-lint, 56% of people said that they checked their mobile phone whilst walking around.

WordPress 2.4 is cancelled – going directly to 2.5

Did you hear ? WordPress 2.4 is cancelled ! Or skipped actually

Welcome WordPress 2.5 !!!

In light of the big changes happening in the codebase and admin section,
we're going to push back the next release to be aimed for early March.

This is the timeframe when 2.5 was originally schedule for, so we're
treating the originally planned 2.4 in December as a skipped release, as
a result of both the holidays and the large changes which we weren't
able to start on until late October.

There's some good stuff in the oven, and we don't want to rush it.

The new release shall be called 2.5. Various official docs and roadmaps
will be updated in due course.

Matt Mullenweg

Trouble with Internet Explorer ! No problem, fix it free

Just Download and Install Mozilla Firefox :

It is a replacement for Internet Explorer that is faster and safer and can add more features using add ons and extensions

How do I stop the Kernells32.dll errors from happening?

The following has solved many people’s Windows Explorer KERNEL32.DLL crashes. It is given solely as information.

In the root directory of C:\, modify or create a CONFIG.SYS file to include the following lines:


If the error persists, try adding this line to your SYSTEM.INI file in the [386Enh] section:

; Increases default stack pages from 2 to 6

(The default is 2. If required, increase by increments of 2 until you find a value that solves the problem. The ; [semicolon] works the same as REM works in AutoExec.Bat.)

Click Edit, Save, Edit, exit. Shut down and restart for the changes to take effect.

Additionally, repeat KERNEL32.DLL errors can often be resolved by deleting your Windows swap file, WIN386.SWP, and letting it rebuild itself.

EXPLORER caused an invalid page fault in MSHTML.DLL

There are quite a few possible remedies for this problem:

  1. Uninstall Yahoo Companion. This seems to be the biggest culprit for this error lately.
  2. Go to IE, Help, About. Check what patches and updates have been applied then check to make sure that the version of mshtml.dll on your computer is correct. For example, the June 2003 cumulative patch (Q818529 – MS02-020) included mshtml.dll version 6.0.2800.1170, 6.0.2726.2500, 5.50.4926.2500 or 5.0.3516.2800 depending on your operating system and version of IE as per its knowledge base article:;EN-US;q818529

If incorrect, uninstall and reinstall the patch.

  1. In IE, go to Tools, select Internet Options, click delete cookies, click delete files and accept the option to delete all offline content and clear history, reboot the system.
  2. Error Message: Internet Explorer Has Encountered a Problem and Needs to Close (Mshtml.dll)
  3. Internet Explorer or Outlook Express Quits Unexpectedly with an Error in Mshtml.dll
  4. An Error Occurs in Mshtml.dll in Internet Explorer 6 on Windows Me

Porn Sites are Attaching to my Favorites


A few obscene sites have attached to my favorites . I cannot removed them, can you help please.

Possible Solution:

There are a couple of options that may work well to fix this problem:

  1. Try cleaning out the adware and spyware files using:
  • Adaware 6.0
  1. Try using this handy little utility:
  • ToolBarCop

A manual registry fix: (backup the registry first)

Start Registry Editor (Regedit.exe)
Go to the following location and check each GUID sub-key. One of which is
the malware toolbar entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Extensions

Also, check here:
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Extensions
(check the values in the right-pane to identify the malware toolbar.)

Spot the entry and delete the appropriate key

Error 35: Incompatible Version of the RPC Stub

This error occurs when trying to use the “Find” function with Internet Explorer. It is caused by a fault in v3.50.5041.0 OLEAUT32.DLL. Replace it with an earlier version to fix the problem. Since it is a system file, you will have to replace it using DOS. Copy the older version to C:\. Then go to the start button and restart your computer in MS-DOS Mode. If you have WindowsME, see below on how to do this.Once in DOS Mode, type the following (no quotes): “copy C:\OLEAUT32.DLL C:\WINDOWS\SYSTEM\OLEAUT32.DLL”. When asked if you want to overwrite, type “Y”. It will then say “1 file copied”. Then restart your computer (alt+ctrl+del or you can just load windows by typing “win” at the DOS screen).For Windows ME Users: To load WinME in DOS mode, copy “COMMAND.COM” and “IO.sys” from “C:\WINDOWS\COMMAND\EBD\” to a formatted floppy disk. Then restart your computer with the floppy disk in the floppy drive and DOS will boot.

Unable to view HTML source code

Problem: I can’t read the HTML source codes from any web site. I go to view/source and the HTML page does not come up.1) [All Windows] This is a common problem. When you have too many temporary internet files stored in your browser, you will notice this behavior in Internet Explorer. To fix this issue, simply clean out the temporary internet files. Here’s how:Bring up your browser;

  1. Select Tools>> Internet Options>> Delete Files.
  2. Check the box titled: “Delete all offline content” and click OK
  3. After all of the files are deleted, you should work normally.

2) [NT 4.0] Cause: Your Cookies folder is located on an NTFS file system partition and you do not have at least Change permissions for the Cookies folder.

To resolve this issue, configure your profile to use permissions that include the Change permission for the Cookies folder. The default the permission settings for the Cookies folder is Full Control (All).

3) [All Windows] This behavior can occur when the path specified for the TMP environment variable is invalid.

If the folder specified by the TMP environment variable is invalid, the file cannot be copied to the temporary folder, and therefore cannot be displayed.

To resolve this issue, specify a valid path for the TMP environment variable. To do so, follow these steps:
Click Start, point to Settings, click Control Panel, and then double- click System.
Click the Environment Tab.
In the User Variables For <username> box, click TMP, type a valid path in the Value box, and then click Set.
Click Ok.

4) [All Windows]

This behavior may occur if Notepad is not installed. The View Source command uses Notepad.exe to display a source file.

Extract or expand the Notepad.exe file from your original Windows disks or CD-ROM to the Windows folder.

The Notepad.exe file is located on:

Windows version Media Location
Windows 3.1 3.5-inch and 5.25-inch disks disk 3
Windows 3.11 3.5-inch disk disk 4
Windows 3.11 5.25-inch disk disk 5
Windows for Workgroups 3.11 3.5-inch disk disk 6
Windows for Workgroups 3.11 5.25-inch disk disk 5
Windows 95 3.5-inch disk disk 3
Windows 95 CD-ROM

Expanding or Extracting the Notepad.exe File Use the method appropriate for your operating system.

Windows 3.1 and 3.11 or Windows for Workgroups:

  1. At the MS-DOS prompt, type the following line

    cd \<windows>

    where <windows> is the name of the folder in which Windows is installed.

  2. Insert the appropriate disk in the floppy drive.
  3. Type the following line:

    expand <source>:\notepad.ex_ notepad.exe

    where <source> is the drive letter of the floppy disk drive containing the Windows disk.

Windows 95:

Use the method appropriate for the media on which you have Windows 95.

Extracting Notepad.exe from the Windows 95 CD-ROM:

  1. Click Start, point to Programs, and then click MS-DOS Prompt.
  2. Type: cd\, and then press [ENTER].
  3. Insert the Windows 95 CD-ROM into the CD-ROM drive, and then close the Windows 95 screen if it appears.
  4. Type the following line at the command prompt, and then press [ENTER]

    extract /a <drive>:\win95\ notepad.exe /l c:\<windows>

    where <drive> is the drive letter assigned to your CD-ROM drive, and where <windows> is the name of the folder in which Windows is installed.

  5. Type exit, and then press [ENTER] to return to windows.

Extracting Notepad.exe from the Windows 95 Floppy Disks:

  1. Click Start, point to Programs, and then click MS-DOS Prompt.
  2. Type: cd\, and then press [ENTER].
  3. Insert disk 3 of the Windows 95 disks into the floppy disk drive.
  4. Type the following line at the command prompt, and then press [ENTER]

    extract /a <drive>:\ notepad.exe /l c:\<windows>

    where <drive> is the drive letter assigned to the floppy disk drive the Windows 95 floppy disk is located in, and where <windows> is the name of the folder in which Windows is installed.

  5. Type: exit, and then press [ENTER] to return to windows.

Information above compiled mostly from Microsoft

A pop-up window was blocked error

When a web application attempts to open an additional Internet Explorer 6 window, the browser returns the error message “a pop-up window was blocked”.Since IE does not have a popup blocker, it must be one of a few things causing this:

  • Check your anti-virus and firewall for an option to block popups.
  • Disable the popup blocker on your Google toolbar.
  • You might have an application on your system that blocks popup windows. Check if you have any Internet security applications running in the Taskbar.

As a possible work-a-round:

Many of the popup blockers have the option to bypass them by holding down the Ctrl key when you click on a link.

How can I have a window open maximized?

When opening a new window in IE ver 6 the new window opens minimized. I want all windows to open maximized so I don’t have to go to task bar and right click and then hit max. any suggestions?Sure. Windows has a memory, it will reopen a window the same way you had it last. You can take the minimized window and drag the edges by holding your mouse arrow over the edge of the window until you see two arrows, then left click and hold the left button while dragging the window to the desired size. Now close the window. It will now reopen each time with that setting.To keep Windows functionality correct, drag the window into a small position while the minimize button in the top right corner (next to the “X”) of the window is selected and drag the window to a large position while the button is in the maximized position. Make sure you perform this procedure one at a time so that Windows will save each setting.

Appname: iexplore.exe Appver: 6.02800.1106

When I double click the explorer icon, it gives me an error message that states, “Internet Explorer has encountered a problem and needs to close. We are sorry for the inconvenience.” “If you were in the middle of something, the information you were working on might be lost. Error Signature: AppName: iexplore.exe
AppVer: 6.02800.1106
ModName: winshow.dll
ModVer: Offset: 00009901
-or-Error Signature: AppName: iexplore.exe
ModVer: 5.1.2600.1217
Appver: 6.02800.1106
Offset: 0003381b
Modname: ntdll.dll
It is possible that a third party spyware may have been possibly installed on your machine. try some spyware cleaning utilities such as Adaware or Spybot S & D for a possible fix. Also you can try:
Winshow.dll Spyware:
Listed below are some MSKB articles pertaining to:

Iexplore.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
(IE 6. XP/ME/2000)
(IE 6. ME)
(IE 6, W98/se/NT4/2000/ME/XP)
(IE 6. XP)

Homepage and Favorites hijacked


  • A rogue web site attaches itself as your homepage and you are not able to change it.
  • Web sites that you have not saved as favorites have attached to your favorites folder and are not able to rid them.

Possible Solution:

There are several adware/spyware scanners that may be very affective in riding your system of this problem. I recommend the following:

  • Adaware 6.0
  • Spybot S&D
  • CWShredder

All of these scanners can be downloaded from the internet for free. Just search from the search box on the right

Clicking a link opens a blank window

Problem:When I’m on the Internet using Internet Explorer, I click on a link and the second window pops up for that link but nothing happens, it’s like the second window just freezes up, it wont load.Solution 1:From Internet Explorer go to: Tools>> Internet Options>> Advanced>> Browsing. Uncheck “Reuse windows for launching shortcuts.”Solution 2:It could be that you have a popup blocker blocking new windows from loading. examples of such programs could be; Yahoo Companion, Google toolbar, a firewall, Earthlink… etc. You may need to uninstall the program or turn off the feature that is blocking new windows.

Note: With some programs of this type, using Ctrl+click or Shift+click will allow
a new window to open.

Solution 3:

From Internet Explorer go to: Tools>> Internet Options. Select Advanced tab and click the “Restore Defaults” button. Click OK


From Internet Explorer go to: Tools>> Internet Options. Select the Programs tab and click the “Reset Web Settings” button. Click OK.

Solution 4:

From Internet Explorer go to: Tools>> Internet Options. Select Advanced tab. Scroll down and un-check the box that says “Re-use Windows for Shortcuts”. Click Apply then OK.

Solution 5:

Solution 6:

Open Windows Explorer. Go to Tools>> Folder Options>> File Types. Scroll down to URL:HyperText Transfer Protocol and select it. Click Edit or Advanced, depending on your Windows version. Select “Open”. Click Edit.

“Application used to perform this action” should read:

(Check the path to iexplore.exe to make sure that is correct and use the double quotes.)

DDE should be checked and in the boxes below it you should have:

#3 (blank)

URL:HyperText Transfer Protocol with Privacy should be the same.

Sometimes it is necessary to uncheck Use DDE.

If you get a blank page:

1. Click Start, and then click Run.
2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.

When accessing websites, I show a red x instead of a picture

Most of the time, clearing out your temporary internet files fixes this issue:Start Internet Explorer> Go to Tools>> Internet Options>> General >> Delete files and Delete offline content. Then while still in the “Internet Options” windows, select Settings under the “Temporary Internet Files” section and reset the “Amount of disk space to use” to 50MB. Be sure to keep your Temporary Internet Files cleaned out periodically.If the above did not work, then try this Microsoft article for possible help:

When trying to access certain sites, I get a “page cannot be displayed” message.

Problem:When I try to access a certain web page it says that the page can not be displayed. I know this page works because I have tried it on other computers. I’ve heard it could be because of a firewall but I do not have a firewall on my computer.Possible Solutions:Method 1:Try to ping the site from the DOS prompt like below:Go to Start>> Run. Type in: cmd (or command) [Enter] At the command prompt type:ping

If this returns as ‘request timed out’, then the site is not reachable. You will not need to do any further troubleshooting.

Method 2:Delete all the Cookies and Temporary Internet Files to see if it helps.Delete Cookies:

  1. Open Internet Explorer
  2. Click Tools>> Internet Options
  3. Click the Cookies button

Delete Temporary Internet Files:

  1. Open Internet Explorer
  2. Click Tools>> Internet Options
  3. Click the Delete Files button
  4. Place a check mark in the Delete all Offline Content checkbox
  5. Click OK

Method 3:

  1. Run the System Configuration Utility. Start>> Run. Type in: msconfig [Enter]
  2. Click on the “Startup” tab and remove the checks from each item in the Name column.
  3. Click the Apply button.
  4. Reboot your computer.
  5. Try again.

If this issue is resolved at this point, reverse the process. However, add one check back at a time to Startup and reboot each time until the issue reappears.

Method 4:Try running Anti-Spyware scanners such as; Ad-aware, Spybot Search and Destroy, CWShredder all of which can be downloaded for free.Also, try here: Microsoft’s Anti-Spyware for another quality freeware utility.

Method #5:Try restoring your Winsock stack as it may have become corrupt.For Service Pack 2 the best way to restore the Winsock stack is simply:Go to Start>> Run. Type in: netsh winsock reset [Enter]
Then reboot.
-OR-To reinstall Winsock2 in Windows 98/ME:

Note: You will need to have access to your Windows 98 installation CD and the network card drivers install CD or floppy.

CAUTION: Please edit or modify the registry with extreme caution; removing an incorrect key or value from the registry can cause serious problems with your computer’s Windows Operating System. Be sure to make a backup copy of your registry prior to making any changes. Perform this procedure at your own risk.

  1. Right-click Network Neighborhood.
  2. Select Properties.
  3. Highlight the offending network card. Click Remove.
  4. Remove the TCP/IP protocol from the card if it does not disappear with the network card entry. Click Ok. Do NOT reboot yet.
  5. Right-click My Computer and select Properties > Hardware > Device Manager.
  6. Verify that the network card is gone. Do NOT reboot yet.
  7. Click Start>> Run. Type in: regedit [Enter].
  8. Navigate to the key HKLM\System\Current Control Set\Services\VXD
  9. Delete both the WINSOCK entry and WINSOCK2 entry.
  10. Navigate to the key HKLM\System\Current Control Set\Services.
  11. Delete the WINSOCK and WINSOCK2 entries there as well.
  12. Exit regedit and reboot the system.

On reboot, Windows will find the network card again. Reinstall the driver and Windows files when requested.

How can I permanently delete the Links folder in my Favorites menu?

Below, you will find two methods that can be used to stop seeing the Links folder in your Favorites menu. In the first method, the Links folder will be permanently deleted. In the second method, the folder will just be hidden from view but will not be deleted from your system. First method:Start>> Run. Type in: regedit [Enter]Drill to the following key: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar

  1. Click once on “Toolbar” to empty its contents into the right pane.
  2. Double click on “LinksFolderName”.
  3. Remove the default word “links” from this string value leaving it blank.
  4. Exit the Registry editor.
  5. Open IE and delete the Links folder from the Favorites menu.

The next time you start Internet Explorer the Links folder will not be recreated.

Second Method: (Using File Attributes)

Using Windows Explorer find the location of your Favorites folder (e.g. C:\Documents and Settings\User Name\Favorites) within that folder will be a sub-folder named Links.

Right click the “Links” folder and select Properties. Check the Hidden checkbox and click OK.

From now on the Links folder should be hidden from the Favorites list. This works for any other folder or link on the favorites menu as well.

I can’t get rid of “about:blank” messages!

Problem:I can’t get rid of about:blank messages when trying to visit sites. I’ve tried a variety of spyware scanners but they do not help. Any thoughts on how to get rid of this annoying problem?Solution:Many people have been able to solve this problem using a combination of two different spyware scanners: HijackThis and About:Buster.
Unable to access secure sites after SP2 download.
It is possible that your firewall is blocking port 443. Try this:Go to Start>> Run, type in each of the following and press Enter after each one:Regsvr32 SOFTPUB.DLL
Regsvr32 Wintrust.dll
Regsvr32 Initpki.dll
Regsvr32 Dssenh.dll
Regsvr32 Rsaenh.dll
Regsvr32 Gpkcsp.dll
Regsvr32 Sccbase.dll
Regsvr32 Slbcsp.dll
Regsvr32 Mssip32.dll
Regsvr32 Cryptdlg.dll
For further help on this issue, visit the following Microsoft Knowledgebase Articles:

How do I clear Auto-complete entries?

Question: How do I clear out all the auto suggestions it comes up with every time I start typing in a textbox?Answer:To modify your settings for the AutoComplete feature or clear all items from the list of form or password suggestions, follow these steps in Internet Explorer:

  1. On the Tools menu, click Internet Options.
  2. Click the Content tab.
  3. Click AutoComplete.
  4. Click the appropriate AutoComplete check boxes, or click Clear Forms or Clear Passwords to clear all saved items from the appropriate AutoComplete history.
  5. Click OK, and then click OK.

To clear individual items from the list of form or password suggestions, click the item in the list of suggestions for that field and then press DELETE. The AutoComplete list automatically appears when you perform any of the following actions on a previously populated form:

  • Type the first character in the field
  • Press the UP or DOWN keys in the field
  • Double-click a blank area in the field

MSKB Article:
How to use the AutoComplete feature in Internet Explorer 5 and 6:­kbid=217148

Cannot click links on web pages

Question: When I open up a web page, I point my mouse over what should be a hyperlink. However, it does not indicate that there is a hyperlink their. This is the case with any web site that I visit.Answer:

  • Make sure that Internet Explorer and Outlook Express are closed.
  • Go to Start>> Run. Type in: regsvr32 urlmon.dll [Enter]
  • Go to Control Panel>> Internet Options>> Programs tab. Click “Reset All Web Settings”

Open Internet Explorer and Outlook Express and retry the hyperlinks.

Runtime Error Message: C:\Program files\Internet Explorer\EXPLORE.EXE

Problem:I am unable to access Internet Explorer. A message states:“Run time error! prog: C:\Program files\Internet Explorer\EXPLORE.EXE
This application has requested the runtime to terminate it in an unusual way.”
Possible Solution:It is possible that you have been attacked by some malware/spyware. Install and update:

  • Adaware SE
  • Spybot S&D

Download these for free from the intenet:

Then, perform a complete system scan using the free anti-virus scanner listed below:

After completing system scans using the two listed scanners and anti-virus scanner, reboot your computer and see if your problem has been resolved.

If it has not, then try uninstalling your Google toolbar, here’s how:

1. Go to Start>> Control Panel>> Add/Remove Programs.
2. Scroll the list until you find “Google toolbar for Internet Explorer”.
3. Remove the program and reboot your system.

Lost Internet Explorer uploading bar?

Question: I have just reinstalled my Windows Operating System. Everything seems OK, except now when I download things, the download bar at the bottom of the window no longer shows the progress of the download. How can I get this back?Solution:It is unknown why this setting changes from time to time. Or, perhaps the setting was changed by accident. In any case, the fix is an easy one:1. Open Internet Explorer and select View from the toolbar.
2. Make sure that the entry titled “Status Bar” has a check mark next to it. If it doesn’t, then just click it once.

Remove a specific URL from address bar

Question: I would like to be able to remove only certain web site addresses from my Internet Explorer address bar. Is this possible? Answer: Yes, there is a small utility called URL Remover for IE that can be downloaded right here at 5 Star Support for free. See below:

Author: Quinqsoft Version : 1.0 File Size: 667KB Windows 95/98/XP

Red X appears when trying to organize favorites

Question: With my Favorites menu in the left pane of my browser window, I click the “Organize” button and it produces an empty window with a small red X in the top left. What could be causing this and how do I fix it?Answer:The “Organize Favorites” sub menu is not displaying your Favorites list (see illustration below) due to one of the following reasons:

  • Missing Shell Name Space registration
  • The Shell Name Space has been disabled from “Manage Add-ons” (XP SP2 only)



To correct this problem:

  1. Be sure you are logged in as Administrator (Windows 2000/XP)
  2. Go to Start>> Run. Type in: regsvr32 /i shdocvw.dll [Enter] or click OK


If you’ve disabled the Shell Name Space from Manage Add-ons, re-enable it.

My Address Bar Has Disappeared

Question: My address bar has disappeared and I don’t see any way to get it back. How can I get it back?Answer:There are a couple of different ways to get the address bar back. I have outlined the two most common methods below:Method #1:Change the Toolbar settings:

  1. Start Internet Explorer
  2. From the top toolbar, click View, then select Toolbars
  3. Make sure that there is a check mark next to the Address Bar entry. If there is no check mark, then simply click the Address Bar entry to activate the Address Bar. Clicking it once again will uncheck this entry.
  4. If the Address Bar appears in the upper right corner but is not available, right click “Address” and uncheck the “Lock The Toolbar” entry by clicking it once.
  5. Now, click “Address” and while holding the click down, drag the Address Bar to a desired location.

Method #2:

Delete the WebBrowser registry key:

Warning: Making mistakes in the Windows Registry can cause serious problems with your Windows Operating System. Be sure to make a fresh backup copy of your registry prior to making any changes to it. Use the Registry Editor at your own risk.

  1. Go to Start>> Run, type in: regedit [Enter] or click OK.
  2. Drill down to the following registry key:

HKEY_CURRENT_USER>>Software>>Microsoft>>Internet Explorer>>Toolbar

  1. Click once on the Toolbar entry to empty its contents into the right pane.
  2. Right-click the WebBrowser key, then select Delete and confirm with a Yes answer when prompted.
  3. Exit the registry editor and reboot your system.
  4. Open Internet Explorer
  5. Select View>> Toolbars

You will see that Internet Explorers toolbar settings have now been restored back to the default setting.

Unable to reset my home page

Question:For some reason I am not able to reset my homepage in IE6. I have scanned my computer for possible adware, malware, scumware but my scanners do not show anything is wrong. Do you have any idea what may be causing this and is there a fix?Answer:It could possibly be that the Lavasoft products (Ad-Ware / Ad-Watch) could be causing this. Here is how to fix the issue:

  1. Start Ad-Watch. Right click on the Ad-Watch icon in the system tray and select Settings.
  2. Turn on all the desired blocking options then ensure that Automatic is turned off (the red cross).
  3. Open Internet Explorer and make the change to your home page (Tools>> Internet Options>> Home Page).
  4. Ad-Watch will alert that a change has been made. When you accept this change, Ad-Watch will use this setting as the default setting.
  5. If you would like Ad-Watch to automatically correct any future changes to your system, turn the Automatic feature back on.
  6. Start Ad-Ware SE. Click on the Gear icon. Select “Default”. Click the “Read current settings from system” link. Check to make sure that these settings are correct. Click Proceed when finished. Ad-Aware SE will use these settings as the replacement values if a browser hijack is found.

Drop down menus not appearing

Question: In IE and Outlook express, when I go to the menus at the top of the page (file, edit, tools etc.), and left click, the drop down menus do not appear (open, print, cut, copy etc.). Only when I move my curser down under the menu do I then see the options under the menu. I want to get it back like normal when you left click on the menu and see all the options without having to move your curser down to see the options.Answer:You may have a corrupt or missing file. You can repair both Internet Explorer and Outlook Express at the same time. Here’s how:

  1. Click Start >> Run. Type in: sfc /scannow [Enter] or click OK.
  2. This will start the System File Checker process. It will look for corrupt and missing files in those programs.

Note: You may need to have your Windows CD handy to complete the process.

How can I stop employees from accessing the Internet?

Question: I have a small business running multiple terminals all running Windows XP and using Internet Explorer. I have been having a lot of trouble keeping my staff focused on their work due to their web surfing habits. Is there a way that I can keep these terminals from accessing the Internet?Answer:There are a couple of ways that I know of that could accomplish this:1. Check your firewall for a setting that could password protect Internet access.2. You could modify/change the Group Policy Object settings:First, be sure that all terminals do not have administrative privileges. Next, you’ll need to be logged in as Administrator to add/edit/modify the settings. Then, go to Start>> Run>> Type in: gpedit.msc [Enter] or click OK. Once the Group Policy Editor loads, go to User Configuration>> Administrative Template>> Desktop>> Control Panel>> Network>> System.

Warning: Be sure that you record all of the changes that you make as mistakes can have very adverse effects on your operating system.

IE opens and then closes

Question: Suddenly today, when I click on IE on my laptop it starts up, gets to the homepage, and then shuts down about time the page comes up or starts to come up. I have run spyware and had 6 items but nothing seemed to serious. What can I do?Answer:It seems that Yahoo did some changing over the past few days that has caused some corrupt toolbar issues. Uninstall your Yahoo toolbar and Internet Explorer should return to normal.Start>> Control Panel>> Add or Remove Programs>> Scroll the list until you find the Yahoo toolbar. Click it and select remove.

Advanced options missing

Question: While in the Internet Explorer, I go to Tools/Internet Options/Advanced. Once I click the Advanced tab, it pops up with a blank page. How can I restore the options that were listed here?Answer:Try this:Go to Start>> Run. Type in: regsvr32 /n /i inetcpl.cpl [Enter] or click OK.The Advanced options should now be restored.

How do I make my own CBR, CBZ and CBT files? Comic books !!!

 What are CBR, CBZ, CBT, RAR, ZIP and TAR files?

Computer files are generally compressed into archive data sets to save space and to organize information better. Common archives are RAR, ZIP and TAR. Comics have a “special” set of extensions to designate them as “comics”. CBR, CBZ and TAR files are comic archive files. A CBR file is the same as an RAR file, CBZ the same as a ZIP file, and CBT the same as a TAR file. The designations allow computers to associate comic reading software with files and allow other non-comic products to use the standard extensions.

The ZIP format takes one or more files and compresses them as one file, with a .zip file extension. The RAR format does the same (and has better compression sometimes).

The TAR format is found primarily on UNIX and Linux operating systems; it can be used on Windows and Mac platforms, although the ZIP format has become the most popular. (Most users are not familiar with .tar files.) The .tar file bundles files together, although without any compression. If a user wishes to compress them, they are advised to use gzip (which turns the compressed file into *.tar.gz ) .

Software programs for making/opening/viewing the contents of these .zip, .rar and .tar files can be found on the Internet.

How do I make my own CBR, CBZ and CBT files?

Place all comic scans into a folder and rename them in page order, eg. 001 002 003 and then archive the files using WinZip, WinRAR or other compression software. Now just rename them with the different extentions. Remember .zip files are .cbz; .rar files are .cbr; and .tar files are .cbt. (Viewers, like CDisplay, can read .all of these file formats, among other extensions, but the de facto standard has become .cbz and .cbr. We recommend you use these two formats.)

You can rename a *.cbz file to a *.cbr file and CDisplay will still view it, although it isn’t recommended. (This might be because WinRAR can read both .zip and .rar files.) Please stick to the original file format/extension name, especially if you’re distributing files via DC++ and/or Bit Torrent.

Also, if you are using WinRAR to rar images into an archive for CDisplay to view, you can just rename the extension from *.rar to *.cbr before you actually start the archiving process.

What’s so good about these digital comic viewing programs?

They’re a great way of viewing image archives, including various options which are optimised for digital comics!

 Reading the comic books !!!!

Comic books – .cbz and .cbr files – CDisplay