JohnDas FunDas & Ideas

Hey everyone,

Microsoft Hotmail has finally woken up to the land of Sabeer Bhatia (creator of hotmail) and Windows Live now offers personalized email addresses with an Indian ring to it.

Check out the list :

Whether you call Bombay your home, or Bangalore, get cool e-mail IDs as proof of residence!	Hrithik, SRK, Dravid, Sachin, Ash, Surya. Who is your favourite star? Exclusive e-mail IDs created for the top icons!	Are you hot? Or would you rather call yourself cool? Find an e-mail ID that describes your personality right here!	Sport, food, drink and lots of fun! IDs for all occasions. How many of these funky e-mail IDs have you got?	You’re in a class of your own, individuality is your key. It’s all about being you, in your own space. It’s about your e-mail ID!

You can get email addresses ending with any of the following :
Where I Live (Indian cities that rock) :

bangalorerocks.in
chennairocks.in
delhirocks.com
punerocks.in
punerocks.com
mumbairocks.in
mumbaimail.in
kolkatarocks.in
iliveinmalabarhill.in
iliveingoa.com
hyderabadrocks.in
goarocks.in
goarocks.com
goaisbliss.com
goagoagoa.com
emailmumbai.com
delhirocks.in
metroonmove.in
delhi4u.in
delhiden.mobi
delhifevers.in
unwinddelhi.in
delhihaatrocks.in
salaamdelhi.in
dillidilwaloki.co.in
dillimanch.co.in
saddidillibindas.mobi

Who I Like (Bollywood Actors and Actresses, Cricketers) :

clubaamir.com
clubabhishek.com
clubabhishek.in
clubaishwarya.com
clubaishwarya.in
clubamitabh.com
clubamitabh.in
clubasin.com
clubasin.in
clubdhoni.com
clubdhoni.in
clubdravid.com
clubdravid.in
clubhrithik.com
clubhrithik.in
clubjyothika.com
clubjyothika.in
clubkajol.com
clubkajol.in
clubkamal.com
clubkamal.in
clubkareena.com
clubkareena.in
clubpreity.com
clubpreity.in
clubrajni.com
clubrajni.in
clubrani.com
clubrani.in
clubsachin.com
clubsachin.in
clubsehwag.com
clubsehwag.in
clubsimran.com
clubsimran.in
clubsrk.com
clubsrk.in
clubsurya.com
clubsurya.in
clubsushmita.com
clubsushmita.in
clubvikram.com
clubvikram.in

Who I Am (good, hot, Guitar Guru) :

iamgood.in
iamhot.in
iammarried.in
iamsingle.in
iamsizzling.com
iamsizzling.in
iamcold.in
iambald.in
iambad.in
martinian.in
boscoite.com
globallyunique.in
dangerouslyhigh.in
bungeejumper.in
goballistic.in
imjustadreamer.in
slipperysadhu.in
trancemusiclovers.in
lover4life.co.in
jinxed4ever.net
partyanimals.co.in
ndanuts.co.in
ministryofsoundlovers.mobi
Underpaid.co.in
Overworked.co.in
Bornleader.co.in
Peoplesperson.co.in (more…)

Here’s an interesting article I found from ecoIron

Take at look at Google, who gets about 200 million queries a day. Let’s assume each query is displayed for about 10 seconds; that means Google is running for about 550,000 hours every day on some desktop. Assuming that users run Google in full screen mode, the shift to a black background [on a CRT monitor! mjo] will save a total of 15 (74-59) watts. That turns into a global savings of 8.3 Megawatt-hours per day, or about 3000 Megawatt-hours a year. Now take into account that about 25 percent of the monitors in the world are CRTs, and at 10 cents a kilowatt-hour, that’s $75,000, a goodly amount of energy and dollars for changing a few color codes.

You’ll find a lot of pages out there that claim “many studies have shown … that dark text on light background is easier to read”. I have always suspected that this is due to the historical accident that physical writing works best with dark ink on light paper-ish stuff. I wonder how many of “those studies” studied populations that grew up unbiased — i.e., grew up and learned to read without the historical accident of paper-based (dark on light) reading.

Only CRT displays use more energy to display brighter things. For everything else, it is completely false that a black display uses less energy than a white page. The backlight on an LCD is on for the entire LCD regardless of what is being shown. The black pixels are only black because the LCD blocks out light. Same with projectors, etc. You’re article is thoughtful, but invalid.

Something to consider: If Google were to change the color scheme to all black, Google would loose AT LEAST 50% of its user base (dare I say 80%?). The “tech Elite” could find work arounds such as using Firefox extensions (Stylish or Greasemonkey), but the vast majority would just switch REGARDLESS of the fact that functionality remained the same.

All the money Google would be saving people (assuming the accuracy of this article) would be guzzled in the end by Google’s competition: Yahoo And Microsoft have lots of white on their search pages.

Fact is, this entire idea of Google saving energy by switching to “black” would lose GOOGLE money, and not be much better energy wise at then end. Not only will it never happened, but even if it did no good would come of it (for anyone).

Save Energy - Prevent Global Warming by changing your computer (and website) colours

Screen savers originally were not meant to provide energy reductions, but they now provide a means for energy savings. The use of dark screen savers can mitigate bright backgrounds, reducing monitor power up to 20%. Screen recovery occurs within 1 second by hitting a key or moving the mouse. Nearly all of the standard Microsoft screen savers are efficient. If you supply your own, please try to use one that uses primarily dark colors.

To set your screen saver, select Start, Settings, Control Panel, Display, and Screen Saver tab. Under name, select a screen saver that uses mostly black and set the Wait time to 5 minutes (or less). The following Microsoft screen savers are energy efficient:

• 3D Flower Box
• 3D Flying Objects
• 3D Text
• Curves and Colors
• Flying Through Space
• Flying Windows
• Mystify Your Mind
• Scrolling Marquee

Note that the 3D Text and Scrolling Marquee allow you to display a personalized message on the screen saver; click on “Settings” after selecting the screen saver.

The following Microsoft screen savers are NOT energy efficient:

• Channel Screen Saver
• Travel

The following Microsoft screen savers also are likely to be inefficient, if only because they use the current display as their foundation. Because many common applications use white backgrounds, the screen will remain bright when the screen saver is active if the user is in any of those applications or uses bright colors in general. These screen savers include:

• Science
• The 60’s USA
• Windows 98

Also note that some screen savers, such as 3D Maze, allow the user to select the background, which cannot be controlled and may result in an inefficient configuration.

Energy Star is an important and automated means for realizing significant power savings. A Standby setting (available only in Windows 95) can drop power over 90 percent from maximum. Screen recovery occurs within 1-4 seconds by hitting a key or pushing a mouse. The Suspend setting can drop power nearly completely, although screen recovery can take up to 10 seconds. Energy Star is not supported by all computers or all operating systems. To activate Energy Star, perform these steps:

• Windows 95 - Select Start, Settings, Control Panel, and Display. (You also can right-click on your desktop and select Properties.) Select the Screen Saver tab. Choose a predominantly black screen saver and set it to wait 5 minutes. Click the Low-Power Standby box and set for 10 minutes. Click the Shut Off Monitor box and set for 20 minutes. Click Ok or Apply.
• Windows 98/ME/2000 - Select Start, Settings, Control Panel, and Display. (You also can right-click on your desktop and select Properties.) Select the Screen Saver tab. Choose a predominantly black screen saver and set it to wait 5 minutes. Click on “Settings” to reach the power management settings. Click the Shut Off Monitor box and set for 10 minutes. We recommend that you do not change any other settings that apply to the computer. Click Ok or Apply. (Note that these versions of Windows support only one power-down level, the Suspend state.)
• Windows NT does not support Energy Star, so you cannot activate the low-power settings through the Control Panel. You still can select a dark desktop background and screen saver. Energy Star still can be activated through the computer’s set-up program, which varies among computer models. Contact your computer support staff if you need assistance.
• Macintosh - Pending.

Note that different computers, operating systems, and monitors may produce different options. However, you should be able to create balanced settings that deliver energy savings. For more detailed implementation information and procedures for additional configurations, click here for instructions provided by the New South Wales Sustainable Energy Development Authority.

Of course, the ultimate energy saver is to power off your monitor, which will produce complete and immediate savings. Although screen savers and Energy Star produce automatic reductions, it takes time for the lowest level to be reached. If you go to a half-hour meeting, there will be no savings for the first five minutes, 20% savings for the next five minutes, 90% savings for the next ten minutes, and 95% savings for the last ten minutes. Energy Star saves 65% of the monitor’s power during the half hour. Powering off saves 100%. So if you know you will be away from your desk for a period, turn off your monitor. When you come back, turn it on again (and remember that it’s asleep, so push your mouse!), and it will wake up in 10 seconds. And this doesn’t apply just to your monitor. Turn off your lights. At night, turn off your printer, fax machine, coffee maker, or copier. Every minute that a machine is off saves energy. (Note that some components, such as your printer, can use a lot of power when they are turned on, so only turn off these machines for extended periods. Your printer should be powered off only if it will be idle for more than an hour.)

LASIK is the acronym for Laser-Assisted in Situ K eratomileusis, a type of refractive laser eye surgery performed by ophthalmologists for correcting myopia, hyperopia, and astigmatism. The procedure is generally preferred to photorefractive keratectomy, PRK, (also called ASA, Advanced Surface Ablation) because it requires less time for the patient’s recovery, and the patient feels less pain, overall; however, there are instances where PRK/ASA is medically indicated as a better alternative to LASIK. Many patients choose LASIK as an alternative to wearing corrective eyeglasses or contact lenses.

The lens of your eye should be an easy terrain for the visiting visual. The door and walls of the eye should be elegant enough to host the light and darkness that flow in. The tear operators should provide the much needed flush, once in a while. And the nerve hotline to the HQ (the brain) should be intact.

If these conditions (and a few others) are fulfilled, then the black and white equipment, famous for its subtle ways of communication, could very well help you distinguish the beauty from the beast.

If not, the adage stands changed: Beauty lies in the specs of the beholder!

According to available data, 75 million people wake up every morning groping in broad daylight for their eyeglasses, or, squinting to see without their contact lenses. But more than a million people, each year, give up their daily struggle and make the decision to have laser vision correction.

Yes. We are on the threshold of an ophthalmic revolution.

Call it LASIK (Laser Assisted In-Situ Keratomileusis).

Laser is not a new admission to the Ophthalmologist’s dictionary. In fact, doctors all over the world have been using laser since 1951 in the treatment of eye disorders. LASIK is the latest arrival, and it is far more precise than other laser treatments such as PRK (Photorefracive Keractomy). It is also the most significant, since it promises a life free from the transparent, gold-rimmed wall that prevents your eyes from feeling the world in front.

With LASIK there is less pain and discomfort in comparison to PRK. Patients experience faster visual recovery with LASIK, which allows them to return to work very soon. Many people experience dramatic improvement in vision within hours of the operation.

Says Dr. George Thomas, Professor, Regional Institute of Ophtalmology: “If you are thinking of a life without glasses, LASIK is the safest bet. LASIK can treat and rectify vision errors caused by nearsightedness, far sightedness and astigmatism. It is the procedure of choice for myopic errors from -1.5 to -15.0 points. For long sightedness, it is effective up to +3.0 points. While PRK treats the surface of the cornea, LASIK treats the inner tissue of the cornea.”

So, if you are the bespectacled genius who feels deprived of the natural ability of the living thing to communicate through its eyes, LASIK holds a promise. You can go after your ambitions, be a pilot, a movie star or even a boxer.

The only place in Kerala with LASIK treatment facility is Little Flower Hospital, Angamali. “On an average, 100 patients come here monthly for LASIK treatment. And the results are amazing.” says Mathew. K. Karingattil (Manager, MEDEA, Excimer Laser and LASIK centre, Little Flower Hospital).

The affectivity of LASIK is widely acknowledged. Then, what is preventing it from reaching the masses?

“The cost,” says Dr. George Thomas. “It would cost the patient around Rs. 9000 per eye. Although the cost is coming down it is still significant. Moreover, the capital investment is too big.”

Mathew Karingattil testifies to this. “The LASIK equipment at Little Flower Hospital cost us around Rs. 2 crore. The maintenance, too, is a costly affair.”

Moreover, most medical insurance companies do not pay for refractive surgery since it is wrongly placed under the category of cosmetic surgery.

Government hospitals too are reluctant to welcome the new technology, the major stumbling block being the lack of adequate funds.

“Quality is important,” says Dr. George Thomas. “The success of LASIK largely depends upon the quality of the machine and the expertise of the man behind it. The upkeep of the equipment alone would drain the pocket. Moreover, the government way of calling tenders and ushering in the lowest bidder is not going to ensure quality equipment,” he adds.

LASIK was first performed in the U. S. in 1991 during clinical trials. Even though the treatment is considered 99 per cent safe, there are a few voices of dissent as well. The fact that the treatment is too recent to gauge its aftermaths has definitely distanced LASIK from the sceptic.

“I am doubtful of its long term effects. I think it is too early to go for it. I will rather wait,” says Rajesh. C.V, a software professional who wears contacts for short sight.

Even experts agree to the one per cent risk that faces the LASIK candidate. ” But then, it is the case with every other operation,” says Dr. George Thomas.

However, the truth is that rare cases of post-LASIK damage have been reported. The most common post-operation disorders are dry eyes, aura, halo and resistance to light, which usually cease after a couple of months. There are a few pre-requisites for LASIK.

To the relief of optical shop owners (whose firms face the threat of extinction if LASIK becomes cheap and popular), laser treatment is not prescribed for people who are “weak-eyed”. The pre-surgery tests are meant to make sure that the patient is the right choice for the surgery. LASIK on wrong candidates could result in major complications. “A fair percentage of those coming for LASIK surgery does not pass the pre-LASIK tests,” says Mr. Mathew.

Ophthalmology is a fast changing science. Even as LASIK conquers the world, another invention, known by the name, Wavefront technology, is making headlines in the West. This new invention promises to give man what it claims to be `super vision’. In simpler terms, it is all about giving man the eye of the eagle.

“At this pace, LASIK could very well become obsolete by the end of the next decade,” says Dr. George Thomas.

For the time being, LASIK is all. We have seen it to believe it!

Flap and Zap

LASIK surgery, is also referred to as `Flap and Zap’, since it involves the removing of the corneal flap. First, a thin layer (about 3 hair strands thick) of the cornea is lifted up as the Microkeratome glides across the cornea. Then, in less than 30 seconds, ultraviolet and high laser energy pulses from the excimer laser reshapes the internal corneal tissue by removing about 1-2 hair strands thick of cornea. The corneal flap is replaced to its original position. Because of the cornea’s extraordinary natural bonding qualities, healing is rapid and does not require stiches.

The entire procedure takes less than two minutes. This procedure also works on the surface of the eye and never enters inside the eye.The pre-surgey tests play a crucial role in ensuring the safety and success of LASIK.

The screening of LASIK candidates are based on strict norms. You are not advised LASIK surgey if you have a history of one of the following.

1. Herpes simplex or Herpes Zoster (Shingler)

2. Glaucoma, Glaucoma suspect, or ocular hypertension

3. Eye diseases such as ureitis/iritis (inflammation of the eye and Blepharitis (inflammation of the eyelids with crusting of the eyelashes)

4. Eye injuries

Patients who are below 18 years, whose hormones are fluctuating due to disease such as diabetes, who are pregnant or breast-feeding, who are taking medications that may cause fluctuation in vision are not ideal choices for LASIK.

If you have a disease or are on medications that may affect wound healing, this may not be a wise option.

Those with immunodefficency states (eg: AIDS) and diabetes or those who are taking certain medications (eg: steroids) may not have proper healing after refractive procedure.

surgery details !!!

LASIK is not usually performed on those with large pupils, thin cornea and dry eyes.